E65 Connect
Compact automatic satellite for motorhome & caravans!
With the Travel Vision E65 Connect, you enjoy worry-free television viewing on the road. This compact automatic satellite dish is ideal for installation on the roof of motorhomes, caravans and camper vans. The E65 Connect searches fully automatically for the right satellite, such as Astra 1 or Astra 3, and is easy to control via the included control box or the handy Travelvision Bluetooth app.
Key benefits:
• 65 cm dish blade: compact and perfect for travelling within Western Europe
• Fully automatic satellite search at the touch of a button
• Manual LNB skew for better reception in southern countries
• Control via Bluetooth app or control panel
• Robust, lightweight design suitable for 12V/24V vehicles
Specifications for the
E65 Connect
| LNB | Single |
| Skew | Auto |
| Software update | Via app or USB |
| Preprogrammed satellites | 6 |
| Dish diameter | 65 cm |
| Weight | 12.5 kg |
| Warranty | 2 jaar |
| Suitable for |
E-Connect - Algemene vragen
The control panel beeps, LEDs are lit and the system does not move.
Your system has a malfunction and the LEDs on the control panel indicate the malfunction.
E-Connect antenna:
Meaning of malfunction/error codes displayed on the control panel
.png)
1- Elevation encoder malfunction during unfolding:
2- Elevation encoder malfunction during folding:
3- Antenna does not reach the azimuth limits within the maximum required time:
4- During search, if azimuth switch of 0° detection is not found:
5- During search, if azimuth switch of 360° detection is not found:
6- During search, if elevation switch of 0° detection is not found:
7- During search, if elevation switch of 360° detection is not found or if the motor cable is defective:
8- LNB or coaxial cable is not connected or defective:
10- Azimuth motor encoder malfunction:
11- Azimuth overcurrent protection:
12- Elevation overcurrent protection:
The E-Connect automatically resumes searching at night.
The connected receiver (or television with built-in receiver) is set to automatically update or refresh the channel list.
This causes the receiver to send a signal to the control box of the E-connect/TVA antenna at random times, and the antenna automatically searches for the satellite.
Disable this option in your receiver's menu (refer to your receiver's manual, automatic update or channel refresh).
The system does nothing
Is the power button on the control box switched on and is the red LED (7) on the control box lit?
The red LED is not lit:
1. Check the power supply voltage.
2. Check the fuse.
3. Check the connection cable of the control unit.
The red LED is lit:
1. Check the ignition switch.
2. Check the connection cable of the control unit.
3. Check the cabling and power supply.
E-Connect - Storingen
The system has found the satellite but is aligned with an object.
The satellite signal is sufficient for satellite reception but may be too weak to view (some) TV channels.
Move the antenna and realign it, or if possible, search again and block the reception between the dish and the object.
Poor reception
There are several possible causes for poor signal reception. Below are a number of possible causes, sorted by frequency.
- Obstacle (building, but also a tree) between the satellite and the system
- You are located at the edge of the reception area.
- LNB not correctly rotated with systems without automatic skew E-Connect/TVA 65/SAT 85 (see the section on skew in the manual, etc.)
- Check whether you have the latest software in your antenna
- Poor connection of a connector
- Damage to the coaxial cable to the system
- Tuner/receiver defective (including cabling between TV and receiver)
- LNB defective
Tips:
Skew: Is the LNB skew set correctly (see chapter 4 in the manual)
Satellite found but you do not have all channels
- Check whether your subscription/smart card is still active.
- Check the LNB settings if you have an E-Connect/TVA 65/SAT 85 with manual LNB skew (see chapter 4 Skew manual).
- Download the latest updates from the website.
Satellite found but no picture
- Check the coaxial cable between the control box and your satellite receiver.
- Check the connection cables between your satellite receiver and your television.
- Switch off and then switch on the receiver and television in sequence.
- Consult the manual for your satellite tuner/television.
The system cannot find a satellite
- Check that there are no obstacles between the system and the satellites to the south.
- Check the LNB skew settings if you have an E-Connect/TVA 65 with manual skew (see manual).
- You may be outside the footprint (transmission area) of the desired satellite. See reception areas.
If you are sure that the above does not apply:
- Check that you have the latest Travelvision E-Connect/TVA software version.
- Check the LNB, coaxial cable and connectors from the outdoor unit antenna to the antenna input (1) on the controller.